|
|
 |
|
11KW Swimming
Pool and Spa Heater |
|
 |
|
This product can be installed indoors or
outdoors, fixed on a smooth and flat surface. Refer to
diagram 1 for correct installation and connection with the
filtration system. Leave at least 200-300mm space above and
around the heater for maintenance and repair. |
|
Attention |
|
Before operating the unit, please read this instruction book
thoroughly and be careful when you use the product. Before you
purchase it, please clearly understand the size of the
product. |
|
Specifiction |
|
Input voltage: |
220V |
|
Power: |
11KW |
|
Package Weight: |
27LB |
|
Machine Dimensions (L*W*H): |
18*4*14 in. |
|
|
|
 |
|
IMPORTANT |
-
Read through the manual
carefully to know better about the heater's installation and
operation, and check the parameters before installation.
-
Check the circulation
system first before turn on the heater.
-
Never disassemble the
heater when connecting to power supply.
-
Never turn on the heater
without water.
-
No power switch is designed
for the heater. The fornt panel switch can only turn off the
controller, thus you should cut off the main power supply
before performing maintenance or repair.
-
Proper grounding is
important.
-
Start the circulation pump
for at least 2 minutes before turn on the heater, and turn off
the circulation pump at least 2 minutes after turn off the
heater.
-
Once
unexpected high temperature 60
centigrade
occurs, the temperature swith cuts off the system. You need to
cut off the main power supply, resolve the fault and wait the
temperature to fall below normal temperature, then press the
"Reset" button to restart the heater.
|
 |
-
Note:This item only support 220V.
-
The
product need to connect wires, the instruction has the
detalied method.
|
|
|
Item Include(022109) |
|
1. A set of swimming Pool and Spa Heater
|
|
|
