Auto-Foot Alternation Switch:
Automatic mode means that rollers continuously rotate. The rollers rotate when the foot pedal is pressed, and the rollers stop when the foot pedal is released.

Corotation-Reversion Switch:
The rollers rotate forwards when the switch points to the corotation position, the rollers stop rotating when the switch is located in the middle, and the rollers rotate reversely when the switch points to the reversion position.

Speed Regulating Knob:
The roller speed can be regulated by the speed regulating knob.


　

Press Wheel Frame

Two small rubber wheels are arranged to press the workpiece to be welded and can ascend and descend by rotating the handwheel on the top, the whole press wheel frame can be moved and fixed as needed, thereby well adapting to the different heights of workpieces, preventing the workpieces from jumping and better ensuring the operating stability.

Sliding Rail System

The slide length is 120cm. Due to the design of the sliding rail, the driven roller frame can slide along the sliding rail freely and easily and can be fixed to the required position by a black screw, different processing requirements of workpieces with different sizes can be met perfectly, the problem of manual moving roller racks is solved, and the practicability is greatly improved.

Digital Display Control Box

Multiple switches are integrated on the control box and facilitate integrated control over the operation. The speed is digitally displayed and set on the control box, the user can observe the running speed more directly and visibly, the operation difficulty of workers is reduced, and the processing effect can be well guaranteed.
　

Motor & Speed Reducer

The motor power is 200W. The motor drives rollers to rotate through the transmission mechanism so that the workpiece can stably rotate on the rollers, and continuous adjustment of the welding position can be achieved. The rotating speed can also be controlled by the speed reducer to meet the welding requirements of the workpieces with different diameters and materials. Operation is stable, and the noise is low.

Polyurethane Wheels

The load capacity is 2T. The roller wheels are made of polyurethane materials, the friction between the roller wheels and the workpiece can be increased, the roller wheels are resistant to temperature and wear and free of slippage, stable rotation of the workpieces can be effectively ensured, and the welding effect is better achieved. The wheels can be mounted in different holes according to the diameters of workpieces, so that the practicability is higher.

Foot Pedal & Automatic Mode

The button for switching the foot pedal mode and the automatic mode is arranged on the control box, the foot pedal can be controlled by the button, the operator can freely select the control modes to meet different demands, rotation of the workpieces can be flexibly controlled in the operating process, and the convenience and safety of welding operation are improved.