|
20140320
X-ray Protective Products |
For radiology (X - CT etc.),
interventional protective, oral, pet X machine, protective oil mining,
industrial inspection of radiation
|
X-ray Protective Apron |
|
|
|
X-ray Protective Cap |
|
|
X-ray Protective Gloves |
|
|
1. radioactive workplace: X ray and gamma ray radiation device: X ray
machine (DR), X ray CT, X ray image device (DSA), X-ray, X-ray,
tomography, dental, Department of orthopedics, X - ray and CT
protection;
2. interventional radiology: cardiovascular angiography, radiation
particle implantation protection, simulator, after installation, linear
accelerator, X knife, gamma knife and other computer room protection;
3. radiation equipment: radiation source, source device and ray device,
industrial radiographic flaw detector, gamma ray flaw detector, non
sealed radioactive source, X ray diffractometer, nuclear facilities and
irradiation facilities and other large facilities;
4. underground non uranium mines: miners such as coal mines, non-ferrous
metal mines, iron ore and tin mines are protected by radiation from high
levels of radon and their progeny.
5. other: in vitro lithotripsy, bone mineral density measurement, X ray
diffractometer protection, etc.. |
[matters needing attention]
(1) After using it should be flat or
hanger hanger, can not fold, so as to avoid long-term folding caused by
rupture, leakage occurs;
(2) It should be stored in the relative humidity is less than 80%, there
is no direct sunlight and away from heat, non corrosive gases and good
indoor ventilation; with no acid, alkali and other damage to the product
items contact, so as to prolong its service life.
(3)The service life of the protective articles should be 4-5 years, and
shall be checked regularly. Check method is to touch or remove the cloth
by hand, by visual observation, if the crack is 1/3, the product cannot
be used, must be scrapped. |
Shipping & Handling Details
|