|
Parameters:
Voltage:220V
Frequency:50-60Hz
Power:750W
Noodle width (flat noodle): 3mm and 9mm
Thickness of dough: 0.004in-0.2in (0.1mm-5mm)
Size:16*12.5*15.5in (408*315*395mm)
Operation:
1, Take down the noodle cutter, adjust the roll knobs of two sides, two
sides must agree, press for 4-5 times.
2, Install the noodle cutter (need to start the motor), adjust the
noodle cutter knobs, two sides must agree, fine noodle (clockwise),
thick noodle (anticlockwise)
Note:
1, Often add the vegetable oil on the turning gear.
2, Forbid to clean the machine with water, please hold some cooking oil
after clean it with brush.
3, It is normal that the motor is hot after working for 1-2 hours.
4, Do not touch the roll and noodle cutter by hand when machine working.
5, Connect the ground wire.
6, Tighten the knob to avoid the cutter and roller shaking.
|
