Car Pump 12V Compressor with air tank

The compressor exerts wide ranges of use, such as tire of vehicle, auto engines and bicycle; balls, toys and boats, etc. with Air tank, it be available to inflate under outage situation.

Specification:

1. Connect the power cord clips with the engine starter of the car.
2. Start up the engine and turn on the switch.
3. Push connector towards valve stem of the tire.
4. The gauge will indicate the pressure of the tire. when the gauge indicate appropriate tire pressure,usually28-35PSI,stop engine ,unplug power cord and remove the connector from valve Stem.
5. The engine will automatically stopped when the tank pressure reach 8Bar for air storage, Deflation valve is used to release spare air in tank

1. While compressor working, keep the engine running to exchange power.
2. The electric source is DC12V 30A.  family electric source is prohibited unless with a transformer
3. Generally, it takes 2 minutes to compress the vehicle tire to the appropriate pressure,35PSI,if the gauge indicates the pressure rising rapidly ,even amounting to 100PSI at the beginning of the inflating ,it means the failure .Please remove the connector from the valve and operate again.
4. Keep the inflating at your sight and attention, please check the gauge for the pressure and not let the pressure too high.
5. Wet and heavy dropping are prohibited. Keep away from children to avoid possible hurt.
6. To keep the good operation of the air compressor, it should not being work more than 10 minutes. If the compressor continuously works more than 10 minutes, should cool it for 10 minutes to avoid Damage the engine and parts.

7.deflate the air tank when long stored.

Item Included:

• 1 Car Pump 12V Compressor with air tank          (201037)