|
1.Always test the pressure with the oil before the new machine
is used for the first time.
2.The machine will shake during
transportation. Please tighten all screws again before using the
machine.
3.Test the pressure of the
machine, prohibit the use of no viscosity liquid such as
(toluene, acetone, water,
etc.) test the working
pressure, to use oil and other lubricants to test the pressure
of the machine, if empty,
the pressure gauge does not
show the pressure.
4.Test method: Pour the
lubricating oil into the barrel of the machine, close the valve,
the gun head to the
outside, open the drill, when
the pressure gauge shows 300-400 kg of pressure, turn off the
drill, open the
valve, spray the lubricating
oil back into the oil barrel, it is OK, the pressure test is
successful, the new
machine must be used for the
first time before the oil test pressure, remember, the above
content must be
carefully read.
5.The
color of parts varies slightly with different production
batches. |
