Sign in or register

My IntBuying

My shopping cart

CNC, Metalworking & Manufacturing> Grinding Machines>
153026:110V Saw Blade Grinder

Similar products

190164:Frequency conversion industrial grade sand-belt machine 110V(with three sets of grinding wheels, 1500W, 72inch)

171040:grinding disc for model trimmer

153158:220V 550W Woodworking Straight Line Cutter for Crusher and Planer Tool

153195:INTBUYING Full Automatic Circular Round Saw Blade Sharpener Machine Sharpening Tool Suitable

190234:Frequency conversion industrial grade sand-belt machine 110V(with three sets of grinding wheels, 1500W, 63inch)

Saw Blade Grinder Sharpen Machine

The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.It's also suitable to grind other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality .


Voltage 110V(if you need 220V,please contact with us)
Grinding Wheel Size 4.92"(12.5cm)
Bore Size of Grinding Wheel 1.26"(3.2cm)
Adjusting Range of Grinding Wheel +/-20 degrees
Power 250w
Handle Turning Angle 30 degrees from left and 45 degrees from right
Revolution 2850rpm
Product Dimension 28.35"x16.93"x11.81"(72x43x30cm)
Package Dimension 16.93"x16.93"x13.58"(43x43x34.5cm)
Weight 70.4lbs (32kgs)
centering arbor size

5/8" (15.87mm); 0.79"(20mm); 0.86"(22mm), 1" (25.4mm); 1.18"(30mm); 1.57"(40mm)

Method of operation

First ,loosing the fascia, then adjust the angle of grinding blade and fasten.

Second, adjusting of center axle

  1)Rotating the center axle to the grinding blade  

  2)Pushing the center axle to the right

  3)Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth

  4)Rotating the rotation table to ensure the angle of grinding blade.

  5)The cross angle between the grinding surface and work surface is about 5°

Third, adjusting of positioning assembly            

  1)Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia,

  2)Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw

Fourth, adjusting the center axle to the same gap of grinding quantity to the right

Last, when all the parts are fastened, the saw blade supported with hand will be grinded



1.base body 3.end cover 4.rotatary base 5.rotary table base 6.rotary table
7.slide base 8.slide disc 9.table nut base screw 12.slide block
13.frame 14.board 15.positioning board cover board 18.adjusting bolt
19.upright post 20.long bolt 21.short bolt 22.long handle 23.short handle 24.positioning pin
25.mat cover 26.diamond wheel 27.cover 28.motor 29.rear stuck disc 30.fore stuck disc
31.big pin 32.small pin 33.hand wheel 34.round handle 35.turret handle foot
37.adjusting bolt base 38.fastening handle 39.switch 40.screw 41.lirnit pin 42.washe

Item Included:

1 set of 110V Saw  Blade Grinder Machine (153026)


About Us Product Service Shipping Payment Privacy refund Warranty

Copyright All Rights Reserved