|
110V Chocolate Cutting Machine |
|
|
|
|
|
|
 |
|
Product
Overview |
|
Electric chocolate shavings machine has
the advantages of simple operation, easy operation, high
efficiency scraping scraping, good-looking style, scraping
thickness can be adjusted; the utility model solves the handheld
knife scraping scraping slow, difficult, easy to hurt hands,
sticky chocolate, dirty and tired, scraping shape appearance,
thickness of rigid scraping.Electric chocolate shavings machine has the
advantages of simple operation, easy operation, high efficiency
scraping scraping, scraping good-looking style, adjustable thickness;
suitable for chocolate pieces of different specifications, improve the
work efficiency for the production, saving production cost. This
product is suitable for a wide range of scraping efficiency is high,
easy operation, low noise, small volume, space saving, beautiful
appearance, reasonable price, no leakage, scraping the remaining few;
all high-quality stainless steel, four legs installed anti-skid base;
width adjustable and thickness adjustable nut for butterfly nut, hand
twist more convenient; increase the counterweight slide, scraping more
secure, more convenient operation. |
|
Product
Parameters |
|
Voltage |
110V Single-phase electricity |
|
Power |
180W |
| Suitable
chocolate size (maximum) |
34*21.5*2.5 |
| Suitable
processing temperature |
15-25℃ |
|
Number of blades |
4(One of them has been installed at the bottom of the machine) |
|
Weight of single
processed chocolate |
1kg(2.2lbs)chocolate block |
|
Size |
40*40*59.5cm/15.75*15.75*23.43in |
|
weight |
21KG |
|
 |
|
Attention |
|
1. A power supply with grounding protection
must be used to prevent personal injury. |
|
2. Before use, the machine should be placed
horizontally to avoid vibration, and the working environment should be
ventilated, clean, and dry to prevent damage to electrical appliances
due to moisture. |
|
3. It is strictly prohibited to press
chocolate with hands during machine operation to avoid damaging the
motor. |
|
4. Do not put items other than chocolate
into the cutting edge to avoid damaging the tool. |
|
5. To prevent overheating and damage to the
motor, the machine must not operate continuously for more than 1 hour. |
|
6. The motor operating speed must not be
less than 50 revolutions per minute. |
|
7. Do not disassemble the machine without
authorization. If there is a malfunction, it must be repaired by
professional personnel. |
|
8. It is strictly prohibited to immerse the
machine in water or rinse it with water during cleaning and maintenance. |
|
Operation
and use |
|
1.Before using the machine, it is necessary
to carefully read the user manual. |
|
2.Before turning on the power, carefully
check whether the screws in each part are tight. |
|
3. Insert the machine power plug into a 110V
power source, and then place the chocolate in the cutting slot. |
|
4. Adjust the fixing plate to secure
the chocolate and adjust the governor to 70 rpm. |
|
5. The thickness of chocolate cutting can be
adjusted by adjusting the number of counterweights, and different props
can be used to scrape chocolate flowers with different effects. |
|
6. The power supply must be cut off after
the work is completed. |
|
7. Chocolate processing temperature18-25℃ |
|
Code of safety |
1) Please keep the machine out of reach of
the child;
2) Do not put your hand into the scraper;
3) Do not place the counterweight on the switch;
4) Please keep the machine firmly in the level of local, prevent the
machine broken or injured people;
5) When you install the cutter, please bring working gloves, and
carefully hurt your hand;
6) Prohibit placing and fetching chocolate blocks and chocolate chip
drawer when the equipment is running;
7) Do not place the machine in a wet spot or exposed to rain;
8) Correct access to the stable power line to ensure voltage stability. |
|
Effect demonstration diagram |
|
 |
|
|
|
Product
Display |
.jpg) |
.jpg) |
.jpg) |
.jpg) |
|
Item Number (153038): 1 x
110V Chocolate Cutting Machine |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
