Sign in or register

My IntBuying

My shopping cart

   
Restaurant & Food Service> Sausage Filling Machine >
153229:Automatic Sausage Filling Machine
Unit:
set
Price:
4,965.00$
Weight:
138.50kg
QTY:
           
     

Similar products

025210:INTBUYING Household and Commercial Use Powerful Desktop Meat Grinder Cutter Meat Slicers for Meat Vegetable Slicing Shredding and Filling Sausages

023505:110V 60HZ Electric Meat Mixer

023506:110V 60HZ Electric Meat Mixer

023507:110V 60HZ Electric Meat Mixer

025084:Intbuying sanitary pump 3 hp 10 T/h flow single suction impeller with 304 stainless steel

Pneumatic Quantitative Sausage Filling Machine 110V

https://topseller365.com/data/prd/153/229/5555.jpeg
Product Overview
This pneumatic quantitative sausage filling and twisting machine is constructed from stainless steel, designed for meat processing enterprises and food factories. It enables quantitative filling and automatic twisting of meat paste and sausage fillings, and is widely used in the production of sausages, ham sausages, and other similar products. The machine features simple operation, precise dosing, and hygienic reliability.
Product Parameters
Voltage 110V
Volume 50L
Power 50W
Power mode Pneumatic (0.4-0.6Mpa) (air compressor recommended to be greater than 0.36/8,60L)(The air compressor needs to be provided by the customer, and the machine does not include an air compressor)
Twisting speed 30-60 times/minute
Filling tube size 10mm/22mm/30mm
Canned quantity adjustment range 10-1000g
https://topseller365.com/data/prd/153/229/chicun.jpg
Product Features
https://topseller365.com/data/prd/153/229/3333.jpg

https://topseller365.com/data/prd/153/229/2222.jpg

https://topseller365.com/data/prd/153/229/12.jpg

Filling Nozzles


The filling machine is equipped with 3 filling nozzles with different diameters—10mm, 22mm and 30mm, and therefore various sausages in different sizes can be conveniently made. The filling nozzles can be easily assembled, disassembled and cleaned, and the practicability is greatly improved.
 

 

Large-Capacity Conical Hopper


The large-diameter conical hopper at the top enables smooth feeding without clogging. It supports continuous feeding and production, eliminating frequent shutdowns for refilling, thus greatly boosting production efficiency.
 

 

Replaceable Filling Nozzle Design
 

Adopts piston-type quantitative filling structure.

Different sizes of discharge nozzles can be replaced according to the casing diameter (10/22/30 mm).
https://topseller365.com/data/prd/153/229/2.jpg

https://topseller365.com/data/prd/153/229/9.jpg

https://topseller365.com/data/prd/153/229/10.jpg

Stainless Steel Material

The whole machine is made of stainless steel, complying with food production hygiene standards. It is corrosion-resistant, rust-proof and free of odor residue.
Compact vertical frame occupies minimal floor space. Adjustable anti-slip support feet ensure stable placement and easy leveling on site

 

Control Panel

Independent red emergency stop button for one-click shutdown in emergencies to guarantee operational safety.Simple control panel with knob adjustment; new operators can master operation without professional training.

 


 

 

Stainless Steel Pull Rod


This machine supports quantitative filling and automatic twisting. No wire tying machine is required, which effectively avoids secondary

https://topseller365.com/data/prd/153/229/4444.jpg

https://topseller365.com/data/prd/153/229/14.jpg

https://topseller365.com/data/prd/153/229/13.jpg

Quantitative Design, Easy Adjustment

Pneumatic precision metering ensures consistent weight for each sausage with minimal weight tolerance, uniform finished product specifications and reduced raw material waste.

Multi-speed adjustable design allows free switching of sausage length and weight. One single machine can produce various sausages of different specifications.

 

 

Adjustable Anti-Slip Support Feet


With double lock nuts design, the height of each foot can be freely adjusted to level the machine on uneven ground, effectively eliminating shaking during operation.

Thickened wide-diameter non-slip plastic base features strong friction resistance, prevents sliding and shifting during high-speed filling, stable placement without scratching workshop floors.

Soft plastic base buffers vibration generated by pneumatic operation, lowers working noise and protects machine structure from long-term vibration damage.

 

Easy Installation


Compact footprint with low investment cost. It is suitable for filling all kinds of ham products, and compatible with natural casings, collagen casings and smoking casings.

Operation

1.Place the machine on a flat, dry, and well-ventilated workshop floor, away from fire sources and corrosive gases.Ensure a minimum clearance of ≥50 cm around the machine for operation and maintenance.Ensure proper grounding to avoid static electricity and electrical leakage risks.

2.Connect to a compressed air source with a stable pressure of 0.4–0.6 MPa.Check for leaks in the air supply line, install an air filter and oiler, and drain water and add oil regularly.The air inlet uses a standard quick-connect coupling; perform an air tightness test after connection.

3.Commissioning Steps

3.1. No-load Test Run: Turn on the air supply, press the start button, and check for smooth piston reciprocation and twisting action, ensuring no abnormal noise.

3.2. Dosing Adjustment: Adjust the filling volume via the control panel knob, test and weigh multiple times until the target accuracy is achieved.

3.3. Twisting Adjustment: Adjust the twisting speed and number of twists according to casing length and product specifications.

3.4. Trial Production: Feed a small amount of filling to test the filling-twisting-discharging cycle, and adjust parameters until the product meets quality standards.

4. Loading: Pour pre-treated filling into the hopper, avoiding hard objects or metal contaminants.

5. Casing Installation: Slide the casing over the filling nozzle and secure it with a clamp, ensuring no tears or wrinkles.

6. Parameter Setting:

- Adjust the filling volume knob to set the weight per sausage link.

- Adjust the twisting speed and number of twists according to product specifications.

7. Start Production:

- Press the start button; the machine will automatically complete the filling-twisting-discharging cycle.

- Monitor the filling volume and twisting effect. If deviations occur, stop the machine and fine-tune parameters.

8. Shutdown Procedure:

- Stop loading first, and press the stop button after the hopper is emptied of filling.

- Turn off the air supply and release residual pressure in the lines.

- Perform equipment cleaning and maintenance.

Safety precautions
1.Check air pressure, electric circuit and emergency stop button before startup; do not operate with wet hands.
2.Keep hands, hair and clothes away from rotating twisting head during operation to avoid pinching injury.
3.Do not reach into the hopper by hand; use tools to feed raw materials. Hard impurities are forbidden.
4.Press emergency stop button immediately if abnormal noise, blockage or air leakage occurs. Cut off power and air supply before troubleshooting.
5.Disconnect power and air source completely before cleaning, disassembling or maintaining the machine. Never flush the control panel with water.
6.Wear work caps and anti-slip gloves during operation; keep the floor dry and clean around the machine.
7.Keep children and irrelevant personnel away from running equipment.
8.Cut off power and air supply for long-term shutdown, clean and maintain the machine regularly.
Application
Pneumatic Quantitative Sausage Filling Machine can fill various sausages with different raw materials quickly and smoothly, can be widely applied to the food processing field and is suitable for different application scenarios, such as meat packing plants, food enterprises, restaurants, central kitchens and small workshops. It is an excellent product for sausage filling.
https://topseller365.com/data/prd/153/229/D72281BE7A73307DDA2A010393C1D00D.jpg
Product Display
https://topseller365.com/data/prd/153/229/3.jpg https://topseller365.com/data/prd/153/229/8.jpg
https://topseller365.com/data/prd/153/229/21.jpg https://topseller365.com/data/prd/153/229/20.jpg
Item Number (153229): 1 xPneumatic Quantitative Sausage Filling Machine 110V

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

无标题文档

About Us Product Service Shipping Payment Privacy refund Warranty

Copyright INTBUYING.com All Rights Reserved