 |
White Attic Pull
Down Ceiling Ladder Stairs |
|
|
|
 |
Product
Overwiew |
The attic ceiling ladder is a
stretchable device specially designed for attics, roofs and interlayers,
can be unfolded and used when it is needed, and can also be hidden in
the ceiling when it is not used. It is becoming more and more popular
recently because of its simple structure, elegance, practicability,
foldability and small occupied area. The user can go upstairs and
downstairs easily and conveniently, and the using demands of customers
can be well met. |
Product
Parameters |
Color |
White |
Material |
Carbon Steel |
Max Vertical Height |
3.2m (10.5ft) |
Weight Capacity |
660LB |
Number of Steps |
13 |
Step Size |
15.75 x 5.51 inch |
Rough Size of Wall Opening |
27.56 x 47.24 inch |
Thickness of Ceiling |
13-50cm (5.12-19.68in) |
Attention
Before operating the stairs, please read the instruction book
thoroughly, and retain it for future reference. Before you
purchase it, please clearly understand the
SIZE of the ladder
(27.56 x 47.24 inch). |
|
 |
.jpg) |
Matters Needing Attention |
1. Please install
the fixing frame according to the height on our website. If the
installation height is not appropriate, please contact us to solve the
problem! |
2. When pulling
down the ladder, do not stretch it backward too much. Just put it on the
ground naturally. Excessive stretching will cause uneven stress and
tilt. If you are not sure about the stretching position, you can take
photos to contact us! |
3. If it is used
for several months or used frequently, you can check whether the screws
are loose and take the check work as routine maintenance of the stairs. |
4. If there is a
fault during use, please contact us first, and do not repair it by
yourself to prevent improper maintenance! |
5. The states are
displayed in the following pictures. (Just use the black-white ladder as
an example). |
 |
Product
Features |
|
Electrostatic Spraying
The high-temperature electrostatic spraying technology is
adopted to process the ladder, so that the attic ladder has good
corrosion and oxidation resistance, the appearance is more
attractive, high practicability and durability are achieved, the
surface coating is more uniform and finer, the coating defect is
reduced, and the service life is longer.
|
|
Carbon Steel Stairs
The 13 ladder stairs are made of high-quality carbon steel
materials, so that the stairs are high in firmness, durability,
strength, bearing capacity and stability, and are not prone to
deformation after long-term use. Crossed grid lines are designed
on the surface of each stair, so that the user treads on the
stairs stably and safely, and the skid resistance is good.
|
|
Folding Ladder Body
The ladder body is designed to be folded and unfolded, S-shaped
thickened connection parts are connected to form the whole
ladder body through stainless steel rivets, therefore the user
can easily pull down and push back the ladder, the occupied
space is smaller when the ladder is folded, and the space
utilization is improved.
|
|
|
Connecting Hinges
The enlarged and widened connecting hinges are used for
connecting the frame and the ladder body stably and firmly, the
connecting strength is well enhanced, the usage safety is
greatly improved, and it can ensure that the ladder can be used
for a longer period of time and folded silently and slowly.
|
|
Rubber Supporting Feet
The supporting feet are made of high-quality rubber materials so
that the supporting feet can be resistant to wear and skid, the
ladder can be placed on the ground safely and stably and is not
prone to sliding, the user can go upstairs and downstairs
without worrying about skid, and the safety is well guaranteed.
|
|
Auxiliary
Parts
The attic ladder can be installed and fixed through triangular
metal parts, folded and unfolded through the safety lock set and
pulled through the pull rod, the using requirements of users for
easy and convenient operation are well met, the safety
performance is greatly improved, and the accidents are avoided.
|
|
Installation Steps |
1. Put the lock rod into the lock
hole.
2. Lock the lock rod by the pin.
3. Tighten the bolts at the four corners.
4. Pull the ladder up and fasten the lower edges of the holes.
5. Put the triangular metal plates on the bolts and tighten them.
|
Watch out when
you install the ladder stairs.
Do not stand
under the hole when you install the ladder stairs. |
 |
Maintenance |
Users are responsible for the
proper operation and maintenance of the ladder they use. Some ladders
will quickly become damaged and unsafe if abused or subjected to
improper demands. If the ladder is regularly maintained and not abused,
you will get the maximum safety and service performance from the loft
wall ladder stairs. |
- Do not overload ladder
stairs.
- Do not knock it
vigorously.
- Do not disassemble it
casually.
- Do not open the tripod
forcibly.
- Do not play movement
on ladder stairs.
|
These improper operations create
severe impact and shock loads that may lead to the failure of steps and
ladders. |
Equipment Check |
Periodically turn the ladder
stair on its end or side and check the following items: |
- Look for broken welds
or deck boards.
- Tighten loose nuts and
bolts.
- Look for ladder stair
frame distortion caused by overloads and impact loads.
|
All the check is for your safety. |
Application |
As a popular product, the attic
pull down ladder can be widely and reliably installed in lofts, attics,
roofs and other places, and provides great convenience for the users. |
 |
Product Display |
 |
 |
.jpg) |
.jpg) |
Item Number (022284): 1 x White
Attic Pull Down Ceiling Ladder Stairs |
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |